PET Strapping Extrusion Machine / PET strapping production line / PET strapping extruder machine
PET packing strap, also known as PET plastic belt, is a world widely used new type package material substitute for steel belt. With years development on it and decrease on cost, it is now widely used in steel industry, chemical fiber industry, Aluminum industry, paper industry, Brick ceramics, Screw industry, tobacco industry, electric industry, textile industry and wood industry. It is most widely used steel belt substitute with high strength.
Heavy duty equipment can be used for four, six and eight straps production.
Technical parameter :
|Material||Extruder||width mm||Strap Quantity||Output kg/h|
|1. PET dehumidifing & crystallization system||one set|
|2.PET-SJ90 single extruder||one set|
|3.Filter Exchanger||one set|
|4.Machine head mould||one set|
|5.Water cooling tank||one set|
|6.Drying system||one set|
|7.First pre heating machine||one set|
|8.First tensile pre heating machine||one set|
|9.Second tensile embossing cooling machine||one set|
|10.Tight hot calibration machine||one set|
|11.Third haul-off machine||one set|
|12.Shortwave infrared ray heating tank||Two sets|
|13.Double winder||one set|
|14.Electric control system||one set|
|1||Extruder||equipped with automatic loading& drying machine|
|2||Die head and mould||It adopts high quality mould steel which features high speed production, even extruding, low pressure on the die head, high precision, long life span, etc. One mould can produce two pieces, high efficiency|
|3||Cooling water tank||Stainless steel cooling water tank controls the crystallization degree to the plastic, and guarantees the extension ratio of belt blank.|
|4||First haul off machine||It is used for the first hauling after extruding and cooling. It consists of electrical motor, speed reducer, hauling roller, etc|
|5||Thermal oven||It is used for heating of raw band, and realizes the second hot extension|
Second haul off machine: Consisted by the second hauling tension, electrical motor and
the traction roller, etc
|6||Second haul off machine||Consisted by the second hauling tension, electrical motor and|
the traction roller, etc
|7||Embossing machine||The raw band reaches primary shaping and accepts embossment on its surface, which improves the transverse orientation intensity and surface friction|
|8||Calibrating device:||Used to the further fixed cooling to prevent it from distortion of the production.|
|9||Third haul off machine||The after forming traction is consisted by the second hauling, tension, electrical motor and the traction roller, etc|
|10||Winding machine||Can be used to the coiling of the production ,and the center coiling type|
is automatic .And it is consisted by the coiling roller, coiling core and the stander, the
coiling roller is consisted of electrical motor, reducer and the transmission system
• Raw material process and extrusion system.
• High performance crystallizing and drying system.
• Production can use 100% recycled material to obtain a high add value strapping band.
• Continuous back-flush screen changer operating technology (Europe technology).
• 100% full automatic self-cleaning screen changer.
• Double column 4 screen cavities.
• PLC Control , change screen without production interrupted , not influence the production quality
• Special designed hot air stretching oven.
• Configured with heating unit and automatic temperature control system.High performance heat insulating layer.
• Better on strip stretching and heating, rapid heating, complete strip orientation stretching.
• Heating oven for sizing
• Special designed technology, make sure the strip forming rapidly • Prevent the strip from un-orientation after orientation, eliminate internal stress,make sure the quality of strip accuracy and quality.
APPLICATION FOR PET STRAPS
Packaging & Shipping
Service & Warranty
Execellent Service-Turnkey Project
DEERMA is committed to providing full support for its local and international clients and dealers and will always provide a prompt response to customer enquiries.
A. Free training for maintenance personnel;
B. Installation service& commissioning by porfessional;
C.The establishment of user fles, a long-term follow-up service and regular return visits;
D. A 24-hour hot-line service ensures the timeliest solution to your faulty equipment.
E.Calling or Door to Door service
F.One year guarantee for whole machine